- Paypal Credit
Gripper 115 - The Filmtools In-Car Windshield Camera Mount
- Mounts on windshields, windows, car's outer surface, or any non-porous surface
- Vacuum supports a 50 lb load
- Suitable for Mini DV and small HD-Cams
The Filmtools Gripper 115 Vacuum Cup Camera Mount works to mount Mini DV and small HD-Cams on windshields, windows or any non-porous surface by pumping the plunger on the vacuum cup until the red ring is no longer visible. This vacuum will support a 50 lb load, even though the actual camera mount is guaranteed up to 9 pounds.
The Filmtools Gripper 115 Camera Mount is a great and practical mount for Mini DV and small HD-Cams. It can also be mounted on the car's outer surface. Your camera locks into this reliable setup with its standard 1/4-20" mounting hardware. The Manfrotto Double Ball Joint is attached to the Wood's vacuum cup with a 3/8-16 socket, unlike the Nukklehead LJ45PH155 which uses a 1/4-20 connection. Our Vacuum Cup's 3/8-16" threaded spud makes it's connection to the ball joint twice as strong as that of our competitor's suction cup, which uses only a 1/4-20" spud.
*Never leave a vacuum mount unattended*
Additional Information about Vacuum Cups:
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Powr-Gripﾮ vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface--thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used on materials of almost any thickness with little risk of damage.
The vacuum cup's pump features a plunger with a red line, which serves as a vacuum indicator. Introduced by Wood's Powr-Grip in the 1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates that air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to repump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely.
Guide to Maintenance, Troubleshooting, and Repair
|Manufacturer Part #||10992|